Acceleration Converter for Standard g and m/s²
Convert a change in speed per second to m/s², ft/s² or standard g. Signed inputs preserve the direction of acceleration.
Convert measurements between metric, US customary and other units. Choose a converter for your quantity, then select the starting and target units.
Try a shorter search or choose another category.
Convert a change in speed per second to m/s², ft/s² or standard g. Signed inputs preserve the direction of acceleration.
Express a signed angle in degrees, radians, gradians or turns, or use arcminutes and arcseconds for small angular measurements.
Compare the size of a parcel in acres, hectares, square feet or square meters. Smaller units include square inches and square millimeters.
Translate a network speed in megabits per second to MB/s or MiB/s, including the eight bits per byte and decimal or binary prefix.
Compare storage sizes in bits, bytes, GB, GiB, TB and TiB. Decimal units use powers of 1,000 and binary units use powers of 1,024.
Express the same material density in kg/m³, g/mL, pounds per cubic foot or pounds per US gallon for a consistent set of fluid conditions.
Express a fixed duration in nanoseconds, minutes, weeks or Julian years. Each day has 24 hours and each Julian year has 365.25 days.
Compare a fluid’s dynamic viscosity in pascal-seconds, millipascal-seconds, poise or centipoise. One centipoise equals one mPa·s.
Convert charge between ampere-hours, milliampere-hours and coulombs, including microcoulombs and nanocoulombs for smaller readings.
Convert energy among joules, kilowatt-hours, electronvolts, thermochemical calories and International Table British thermal units.
Express a push or pull in newtons, dynes, ounce-force, pound-force or kilogram-force. Kilogram-force uses standard gravity.
Convert hertz through terahertz or compare a shaft speed in rpm with cycles per second by counting one cycle per revolution.
Compare mileage in US or imperial mpg with kilometers per liter or liters per 100 km, accounting for different gallon sizes.
Compare light falling on a surface in lux, kilolux, phot or foot-candles. Lux measures lumens per square meter.
Convert a kinematic viscosity rating among stokes, centistokes, mm²/s and ft²/s. A centistokes is one square millimeter per second.
Convert a distance from nanometers to nautical miles, including feet, inches and kilometers. A mile here uses the international foot.
Compare magnetic flux density readings in teslas or gauss. Smaller scales include milligauss, microteslas and nanoteslas.
Convert mass from micrograms to tonnes, including pounds, stones and metric carats. Choose US short tons or UK long tons for bulk weights.
Compare electrical, mechanical and thermal power ratings in watts, horsepower or Btu per hour. Select mechanical or metric horsepower.
Convert a pressure reading between psi, bar, kPa, torr and atmospheres while keeping the same gauge or absolute reference.
Compare a speed in mph, km/h, knots or meters per second. The knot setting uses one international nautical mile per hour.
Convert temperatures between Celsius, Fahrenheit, kelvin, and Rankine. Enter a reading and select the starting and target scales.
Express a temperature rise or drop in Celsius, Fahrenheit, kelvin or Rankine. A 10 °C change spans the same interval as an 18 °F change.
Compare insulation ratings by converting a US R-value to metric RSI or back. Both describe the area-normalized resistance of the same assembly.
Translate a torque setting in pound-inches or pound-feet to newton-meters, newton-centimeters or kilogram-force meters.
Translate type and layout sizes among CSS pixels, points, picas and millimeters using the CSS reference of 96 pixels to an inch.
Convert liters to US cups, cubic yards to cubic feet, or gallons to milliliters. Select US liquid or imperial gallons to match your measurement.
Compare a pump or fan rating in liters per minute, US gallons per minute, cubic feet per minute or cubic meters per hour.