Average Power From Work and Time
Convert mechanical work in joules and elapsed time in seconds into average power in watts. Use the work done over the full interval.
Find kinetic energy, torque, buoyancy, wave speed and more from measured quantities. Check the input units and physical assumptions for each equation.
Try a shorter search or choose another category.
Convert mechanical work in joules and elapsed time in seconds into average power in watts. Use the work done over the full interval.
Hear a slow pulse when two tones sound together? Enter both frequencies in hertz to find the number of amplitude beats per second.
Find the upward force on an immersed object from the displaced fluid volume, fluid density, and gravity. Enter only the volume below the surface.
Locate the balance point of two masses along a line. Enter each mass in kilograms and each position in meters from a common origin.
Find the inward acceleration of an object following a circular path. Enter its tangential speed in m/s and the path radius in meters.
Estimate average contact pressure in pascals from the force perpendicular to a surface and the area carrying that load in square meters.
Find the critical angle in degrees for light traveling from a higher to a lower refractive index, where refraction gives way to total internal reflection.
Find the change in gravitational potential energy when a mass rises or falls. Enter a signed height change and the local gravitational acceleration.
Estimate steady heat transfer through a flat layer in watts using its conductivity, face area, thickness, and temperature difference across the faces.
Use Hooke’s law to find a spring’s restoring force in newtons. Enter its stiffness and signed displacement from equilibrium.
Calculate the gauge pressure at a depth in a stationary liquid. Fluid density, depth, and local gravity give the pressure rise above the surface in pascals.
How much does momentum change during contact? Enter the average net force in newtons and its duration in seconds to find the impulse.
How much energy does a moving object carry? Enter its mass in kilograms and speed in meters per second to find its kinetic energy in joules.
Calculate one-dimensional momentum in kg·m/s from mass and velocity. The sign of the result tells you the direction along your chosen axis.
Estimate how many millimeters a bar lengthens or contracts. Enter its initial length, linear expansion coefficient, and signed temperature change.
Estimate the force available before two surfaces start to slide. The normal load and coefficient of static friction give the limiting force in newtons.
Calculate work in joules for a constant force applied at an angle. Enter the displacement and the angle between the force and the motion.
Find the net force in newtons needed to accelerate a given mass. Use signed acceleration to show which way the force acts along your axis.
Estimate how many seconds a simple pendulum takes for a complete swing. Use its pivot-to-bob length and local gravity for a small swing angle.
Calculate the Reynolds number for a flow from density, speed, characteristic length, and dynamic viscosity. For a round pipe, use the inside diameter.
Calculate the energy of rotation from angular velocity in rad/s and moment of inertia about the same axis. The result is in joules.
Calculate heat gained or lost in joules from mass, specific heat capacity, and temperature change while the material stays in a single phase.
Calculate the refracted angle from the incident angle and two refractive indices. Measure from the normal and check for total internal reflection.
Find sound intensity level in decibels from acoustic intensity in W/m². Use the standard reference of 10⁻¹² W/m² or enter your own.
Estimate how many joules a compressed or stretched spring stores. Enter its spring constant in N/m and the displacement from its unloaded length.
Find the time for one complete oscillation of a mass on a spring. The calculation uses mass in kilograms and spring stiffness in N/m.
Estimate the lowest note of a string fixed at both ends. Enter its vibrating length, tension, and mass per meter to get frequency in hertz.
Find image distance in centimeters for a converging or diverging thin lens. The signed result distinguishes a real image from a virtual image.
Evaluate the turning effect of a force in newton-meters. Enter the distance from the pivot, force magnitude, and angle between the force and the arm.
Calculate fluid throughput in cubic meters per second from cross-sectional area and the mean velocity perpendicular to that section.
Find a wave’s propagation speed in m/s from frequency in hertz and wavelength in meters. Use measurements taken in the same medium.